DELGRIT-COAL SLAG

Blasting Abrasives

Category:

DELGRIT-COAL SLAG is an Aluminum Silicate blast cleaning Grit made of coal slag from coal fired power stations.

  • Blast cleaning of Steel and Concrete surfaces,
  • Removal of mill scale, rust, old paint, dirt etc.
  • Suitable for SA-3, SA-2½ and SA-2.

 

Chemical Parameters

  • Chloride (water soluble)                    –
  • Sulphate ( “         “       )                     –
  • Calcium Carbonate-CaCo3                —   <1%

Blast Grade Product range

  • A2 (0.2 – 1.0 mm)

Slag Abrasive; Blasting type, use to obtain an Anchor Pattern of 20-40 Microns at 620 KPA (90 PSI) nozzle pressure, 50 Kg(110LB) 3 ply paper bag

  • A3 (0.2 – 1.4 mm)

Slag Abrasive; Blasting type, use to obtain an Anchor Pattern of 35-65 Microns at 620 KPA (90 PSI) nozzle pressure, 50 Kg(110LB) 3 ply paper bag

  • B2 (0.8 – 2.20 mm)

Slag Abrasive; Blasting type, use to obtain an Anchor Pattern of 75-125 Microns at 620 KPA (90 PSI) nozzle pressure, 50 Kg(110LB) 3 ply paper bag

Grain sizes

Type A1         – 0.2   –   0.6mm                      Type AB          – 0.2   –   2.2mm

Type A2         – 0.2   –   1.0mm                      Type B1          – 1.2   – 2.2mm

Type A3        – 0.2   –   1.2mm                     Type B2          – 0.8   – 2.2mm

Type X           – 0.5   –   1.5mm                     Type B3          – 0.5   – 2.2mm

For more Information regarding this Product you can contact us

Mr. Varghese Jacob
Tel #: 00966 3 8921305 Ext 229
Mobile #: 00966 503814127
Fax #: 00966 38682561
Email : jacob@delogss.com
Delmon Oil & Gas (DELOGSS)
Near Dammam Community College
PO BOX 6800, Dammam – 31452
Saudi Arabia
Tel # 00966 3 8921305
Fax # 00966 3 8682561
Email : delmon@delogss.com